IE 11 is not supported. For an optimal experience visit our site on another browser.

We are able to add printers as a non-root administrative user via lpadmin on localhost without entering a password. We are prompted for a password as root via lpadmin on localhost. root is a member of _lpadmin and admin groups, the latter being the SystemGroup defined in cupsd.conf. CUPS-Add-Modify-Printer policies are not modified from the defaults. craigslist sherwood oregon rentals. stbemu tn. pay rent sandwell. Enter user Root's user name and password when prompted. Galeon dialog Enter user name and password for "CUPS" at localhost:631 User name root Password ******* OK B.1.3. cups(1) Apple Inc. cups(1) NAME top cups - a standards-based, open source printing system DESCRIPTION top CUPS is the software you use to print from applications like word processors, email readers, photo editors, and web browsers.It converts the page descriptions produced by your application (put a paragraph here, draw a line there, and so forth) into something your printer can understand and. Also, the web interface at 127.0.0.1:631 was not responding. This was caused by cups changing the names of the .service files in /lib/systemd/system. it used to be called org.cups.cupsd.service. Now it's called cups.service. I disabled org.cups.cupsd.service and enabled cups.service and I'm back to normal. Password: (root@jx.y.abc) Password: (root@jx.y.abc) Password: root@jx.y.abc: Permission denied. Step 1: Open SADP Tool and select the camera/NVR/DVR you want to reset by checking the box next to the device on the left side of the list and then click the Forgot Password link at the bottom of the pop-out tab on the right of the SADP window. Package: hplip-cups Version: 3.11.7-1 Severity: important My server has hplip-cups installed. Today, when I was trying to upgrade some packages, the update stopped and printed "Password for root on localhost?". Restart the CUPS Service. After making the above changes, restart the CUPS service as shown below. # service cups restart Shutting down cupsd done Starting cupsd done CUPS Web UI for Remote Access. After the above changes, you should be able to access the printer from Web URL as shown below: https://{your-ip-address}:631/admin. Step 1: Open the command line on your system. Step 2: Open mysql using the sudo command: sudo mysql. Step 3: Enter the password for this account. Step 4: Change the auth_plugin to mysql_native_password, and the password for the root account, in a single command:.

Cups password for root on localhost

Cups printing permissions vary - users can clear their own jobs waiting in the spooler but only root can add/remove printers. If you are trying to add a printer, login as root and use the root password. Top. arzgi. Posts:919. Joined:2008-02-21 17:03. Location:Finland. You will be asked for the administration password (root or any other user in the "sys", "system", "root", "admin", or "lpadmin" group on your system) when performing any administrative function. The "lpadmin" command is used to manage printers from the command-line. lpadmin -p myprinter -E -v "ipp://11.22.33.44/ipp/print" -m everywhere. ssh [email protected] uses the same password for root. It looks like you have not set root password. To do that log in as root using sudo -s then use passwd command to set root password. After that you must be able to ssh as root . https://askubuntu.com/questions/9017/how-to-know-my-root-password. I find it easier to just reset the root password. Here are the steps: Stop the server # service mysql-server stop Restart it with mysqld --skip-grant-tables # mysqld --skip-grant-tables & Login as root no password required # mysql -u root mysql> use mysql; I then like to see the users I am going to be dealing with so. Comment-out this line: Listen localhost:631; Add this line Port 631 # vi /etc/cups/cupsd.conf .. #Listen localhost:631 Port 631 Listen /var/run/cups/cups.sock .. Allow Local Subnet to Access Printer Web GUI. Add the local desktop IP address or the subnet from which you want to access the printer URL, it should look like below in /etc/cups/cupsd. To reproduce: Set root password of a linux test system to foobar22 Set password of current user to foobar22 1 Go to localhost:631 in Cups 2.1.3 Click &quot;Administration&quot; Click &quot;Add Prin. When you are asked for a username and password, enter your login username and password or the "root" username and password. After the printer is added you will be asked to set the default printer options (paper size, output mode, etc.) for the printer. Make any changes as needed and then click/press on the Set Default Options button to save them. The CUPS web browser interface can be accessed from all supported browsers. Depending on the task that you are performing, you might be prompted for a user name and password, or for the root user name and password. Note the following requirements for using the CUPS web browser interface:. I tried setting up CUPS tonight, and after going to localhost:631, I chose Do Administration.. I then got the authentication dialog, and tried any number of username/password combinations with no luck. I tried root/root pw, my personal username/pw, CUPS, admin, nothing. cups(1) Apple Inc. cups(1) NAME top cups - a standards-based, open source printing system DESCRIPTION top CUPS is the software you use to print from applications like word processors, email readers, photo editors, and web browsers.It converts the page descriptions produced by your application (put a paragraph here, draw a line there, and so forth) into something your printer can understand and. Listen localhost:631 Listen /var/run/cups/cups.sock # Show shared printers on the local network. Browsing On ... Change the password for root and my username. When cups asks for a username/password using root and the new password. Not a elegant solution but it works. Search Raspian, Cups, Brother to find out how to load the x86 Brother Drivers. Or you can edit the /etc/cups/cupsd.conf file. If you have forgotten the admin password, it is possible to allow a user to administer CUPS. To do this, enter this command as root: [email protected] # lppasswd -a username Enter password: Enter password again: You can then administer CUPS with this user. Changing the MySQL root user password.To reset the password for MySQL you first must create a new file with the following contents: ALTER USER 'root'@'localhost' IDENTIFIED BY 'PASSWORD'; Where.Oct 23, 2020 · Failed to get D-Bus connection: Connection refused. Ask Question Asked 1 year, 8 months ago. Modified 3 months ago. ... or are related to Docker images, ....May 22, 2019 ·. set a new password for the Administrator account changed the master password reinstalled the printers, restarted the computer, activated the root password added a new administrator account used booth the shorter admin username and the longer Nothing helps I still got the prompt about wrong username/password! Any ideas on how to solve the issue?. Restart the CUPS Service. After making the above changes, restart the CUPS service as shown below. # service cups restart Shutting down cupsd done Starting cupsd done CUPS Web UI for Remote Access. After the above changes, you should be able to access the printer from Web URL as shown below: https://{your-ip-address}:631/admin. Package: cupsys Version: 1.1.23-10sarge1 Severity: wishlist File: cups Hi. I hate CUPS. You have my sympathies. :-P I've been trying to help a friend with his system. Print using CUPS in linux for Zebra printer. Make sure CUPS is installed in the server. Logon to cups using b ro wser: localhost:631. You'll get the below screen. Click on the Add Printer button to add new printer and fill the details below and give Continue. eg., Select: App socket/HP jet direct and click continue. Give the IP address of the. Print using CUPS in linux for Zebra printer. Make sure CUPS is installed in the server. Logon to cups using b ro wser: localhost:631. You'll get the below screen. Click on the Add Printer button to add new printer and fill the details below and give Continue. eg., Select: App socket/HP jet direct and click continue. Give the IP address of the. When trying to click on the "Add Printer" button at the CUPS web interface (localhost:631) I instantly get this error: Unauthorized. Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket. 19. · Termux FTP server is based on busybox and service is managed by [ Termux -services] 即可模拟root环境 Tor has, for example, been used by criminal enterprises, hacktivism groups, and law enforcement agencies at cross purposes, sometimes simultaneously; likewise, agencies within the U I did everything from the tutorial but when I try to connect to the server , it. To install CUPS using a precompiled binary, issue the following command from a root terminal: # pkg install cups. ... substitute the server's local IP address for localhost. The CUPS web interface is fairly self-explanatory, as there are sections for managing printers and print jobs, authorizing users, and more. Additionally, on the right. Frequently Asked Questions What Username and Password Do I Use? If you are asked for a username and password when accessing the CUPS web interface (localhost:631), use your login name and password. This is the same information you use to access your computer every day, unlock your computer's screen saver, install new software, etc. All the printer configurations & classes that we setup using lpadmin command line, can also be managed from your browser from the following location: https://hostname-or-ipaddress:631/admin. To configure this URL, you must do the following changes on your /etc/cups/cupsd.conf. Modify the cupsd.conf file, and do the following two changes:. I'm just trying to set my system up again, so adding a printer via CUPS. I've logged into localhost:631, click Administration, click Add Printer, type my system username and password in and then it brings up a page 'Forbidden'. Cleared the cookies, tried a few times since and it just says forbidden. ... CUPS wants the user "root" and root. This is an automatic notification regarding your Bug report which was filed against the cups package: #640939: hplip-cups: asks for root password when cups updates PPDs It has been closed by Didier Raboud <[email protected]>. Their explanation is.

nj

yr

vv

ki
ew
All solutions I found were much more complex than necessary and none worked for me. Here is the solution that solved my problem. There isn't any need to restart mysqld or start it with special privileges.. sudo mysql -- for MySQL ALTER USER 'root'@'localhost' IDENTIFIED WITH mysql_native_password BY 'root'; -- for MariaDB ALTER USER 'root'@'localhost' IDENTIFIED VIA. Re: Username and Password for CUPS. It depends on the version of OpenSUSE you are using. Previously you had to set up a single password to use across the system; from 10.3 you could use username and password. I don't know if things have changed again in 11; however, it is explained in the documentation. set a new password for the Administrator account changed the master password reinstalled the printers, restarted the computer, activated the root password added a new administrator account used booth the shorter admin username and the longer Nothing helps I still got the prompt about wrong username/password! Any ideas on how to solve the issue?. After updating everything I could think of that was related to CUPS, including klusrmgr, I still could not get past the user id and password prompt. But when I assigned a password to root, and saved the file in klusrmgr, I could then get past the user id and password prompt. And CUPS started sending stuff to my printer. Very nice. Thanks for. Password Sign up for GitHub By clicking "Sign up for GitHub", ... "GET /cups.css HTTP/1.1" 200 87 localhost - root [23/Apr/2003:23:43:01 +0200] "GET /printers/lpdtest HTTP/1.1" 200 3321 localhost - root [23/Apr/2003:23:43:02 +0200] "GET /images/show-completed.gif HTTP/1.1" 200 337. . Give the printer name (same as configured in CUPS) Also select: do not query host spooler or printer for print request. Successfully printed the label in the printer. Conclusion and tips: If cups asks for password give the root password (Sometimes it might not accept, use the following command to reset the CUPS password #lppasswd -g sys -a root). The primary mechanism for Ubuntu printing and print services is the Common UNIX Printing System (CUPS). This printing system is a freely available, portable printing layer which has become the new standard for printing in most Linux distributions. CUPS manages print jobs and queues and provides network printing using the standard Internet. When the terminal has been opened, execute the command listed below: sudo apt-get install cups -y to install the CUPS print server. In a Ubuntu environment, run sudo systemctl start cups and specify Enable Cups as nano /etc/cups/cupsd on an Ubuntu platform. conf. The cups should start from the start button, with uot ch rysystemctl restart cups. The primary mechanism for Ubuntu printing and print services is the Common UNIX Printing System (CUPS). This printing system is a freely available, portable printing layer which has become the new standard for printing in most Linux distributions. CUPS manages print jobs and queues and provides network printing using the standard Internet. We are able to add printers as a non-root administrative user via lpadmin on localhost without entering a password. We are prompted for a password as root via lpadmin on localhost. root is a member of _lpadmin and admin groups, the latter being the SystemGroup defined in cupsd.conf. CUPS-Add-Modify-Printer policies are not modified from the. Re: Username and Password for CUPS. It depends on the version of OpenSUSE you are using. Previously you had to set up a single password to use across the system; from 10.3 you could use username and password. I don't know if things have changed again in 11; however, it is explained in the documentation. CUPS cannot read your Linux account/password (it needs PAM for that, and Slackware does not use PAM). If the password file does not yet exist, we create it as follows, assuming your user account is "alien": lppasswd -g wheel -a alien. If the password file existed, then a line for the alien account would have been appended to it. When you are asked for a username and password, enter your login username and password or the "root" username and password. After the printer is added you will be asked to set the default printer options (paper size, output mode, etc.) for the printer. Make any changes as needed and then click/press on the Set Default Options button to save them. When you are asked for a username and password, enter your login username and password or the "root" username and password. After the printer is added you will be asked to set the default printer options (paper size, output mode, etc.) for the printer. Make any changes as needed and then click/press on the Set Default Options button to save them. I just enabled CUPS on my Slackware 14.2 system. I then connected via web browser to localhost:631. Under the "Administration" tab I clicked "Add printer", at which point it asked me for a username and password. I mistakenly entered my normal username & password instead of root's credentials. Comment-out this line: Listen localhost:631; Add this line Port 631 # vi /etc/cups/cupsd.conf .. #Listen localhost:631 Port 631 Listen /var/run/cups/cups.sock .. Allow Local Subnet to Access Printer Web GUI. Add the local desktop IP address or the subnet from which you want to access the printer URL, it should look like below in /etc/cups/cupsd. # lppasswd -a root Enter password: Enter password again: lppasswd: Unable to open password file: Permission denied # stracing lppasswd reveals that it is trying to create /etc/cups/passwd.md5. Temporarily chmod'ing og+w /etc/cups reveals that passwd.md5 is created as user "lp", but /etc/cups is owned by root. As CUPS runs as root by default, no further actions are required to enable it to read the key file. You can make CUPS listening on an aditional SSL port, although it should support StartTLS to upgrade an unencrypted connection to an encrypted one. The next makes CUPS listen on ssl_port , e.g., 632 on all interfaces (IPv4 only):. sudo systemctl disable --now org.cups.cupsd.service. Then remove manjaro-printer by. sudo pacman -Rsn manjaro-printer. Afterwards, check if cups is still installed by. pacman -Qi cups. If yes, then remove it as well by. sudo pacman -Rsn cups. You will still have config files left over, I would start to look for all files / folders within your. CUPS_SERVER The hostname/IP address and port number of the CUPS scheduler (hostname:port or ipaddress:port). CUPS_SERVERBIN The directory where server helper programs, filters, backend, etc. can be found. CUPS_SERVERROOT The root directory of the server. CUPS_STATEDIR The directory where state files can be found. CUPS_USER. tag 640939 moreinfo unreproducible thanks Hello all, I discussed this with Till, and we both have no real idea how to get to a situation where lpadmin as root asks for a password. It is already called with -h /var/run/cups/cups.sock to ensure it's not talking to a remote server. It seems you need a particular cups configuration to achieve this. To reset the password for MySQL you first must create a new file with the following contents: ALTER USER 'root'@'localhost' IDENTIFIED BY 'PASSWORD'; Where PASSWORD is the new password to be used. CUPS stands for Common UNIX Printing System. lpadmin is a command line tool used to configure printer and class queues provided by CUPS. A system running CUPS is a host that can accept print jobs from client computers, process them, and send them to the appropriate printer. It can also be used to set the server default printer or class. Select kernel/drivers/parport modules menu printer + USB Printer support. If there is a minus sign (-), go straight on to the next section on installing the USB printer module . If the module is already installed, exit from the menu, exit from modconf and exit from the Root user's account. The primary mechanism for Ubuntu printing and print services is the Common UNIX Printing System (CUPS). This printing system is a freely available, portable printing layer which has become the new standard for printing in most Linux distributions. CUPS manages print jobs and queues and provides network printing using the standard Internet. cups(1) Apple Inc. cups(1) NAME top cups - a standards-based, open source printing system DESCRIPTION top CUPS is the software you use to print from applications like word processors, email readers, photo editors, and web browsers.It converts the page descriptions produced by your application (put a paragraph here, draw a line there, and so forth) into something your printer can understand and. Jun 17, 2022 · Page 1 of 2 - Chrome Hijack, redirects to Pulpsearch.com and then quickly to Bing - posted in Virus, Trojan, Spyware, and Malware Removal Help: These keeps coming back. By default the cupsd since CUPS 1.2 (since openSUSE 10.2) listens only on internal ("localhost") network interfaces (and a Unix domain socket) in /etc/cups/cupsd.conf for CUPS 1.2 and later: Listen localhost:631 Listen /var/run/cups/cups.sock For a CUPS 1.2 (and later) network server you must change it to listen on the outer network too. I'm just trying to set my system up again, so adding a printer via CUPS. I've logged into localhost:631, click Administration, click Add Printer, type my system username and password in and then it brings up a page 'Forbidden'. Cleared the cookies, tried a few times since and it just says forbidden. ... CUPS wants the user "root" and root. Normally you don't need to enter a root username and password to use CUPS. The error is likely to be in /etc/cups/printers.conf You could check the authorization entries in your printers.conf Even simpler though is that CUPS.org recommends just using your normal admin username and password when asked for authorization:. tag 640939 moreinfo unreproducible thanks Hello all, I discussed this with Till, and we both have no real idea how to get to a situation where lpadmin as root asks for a password. It is already called with -h /var/run/cups/cups.sock to ensure it's not talking to a remote server. It seems you need a particular cups configuration to achieve this. Give the printer name (same as configured in CUPS) Also select: do not query host spooler or printer for print request. Successfully printed the label in the printer. Conclusion and tips: If cups asks for password give the root password (Sometimes it might not accept, use the following command to reset the CUPS password #lppasswd -g sys -a root). Frequently Asked Questions What Username and Password Do I Use? If you are asked for a username and password when accessing the CUPS web interface (localhost:631), use your login name and password. This is the same information you use to access your computer every day, unlock your computer's screen saver, install new software, etc. Server Installation. Install the neccessary packages for CUPS server. Concerning the --no-install-recommends option the same as for the client installation applies. # apt-get --no-install-recommends install cups cups-client. Surely, you also want to install some of the packages containing PPD (PostScript Printer Definition) files (“drivers. I just enabled CUPS on my Slackware 14.2 system. I then connected via web browser to localhost:631. Under the "Administration" tab I clicked "Add printer", at which point it asked me for a username and password. I mistakenly entered my normal username & password instead of root's credentials. You can get to the CUPS admin page by connecting to http://localhost:631. But if you want to do anything useful, you have to present your administrator password. Who's the administrator? root of course.What's the password? Well, you have to set it to whatever you want. To do so, go to a root shell and type: lppasswd -a root. I'm just trying to set my system up again, so adding a printer via CUPS. I've logged into localhost:631, click Administration, click Add Printer, type my system username and password in and then it brings up a page 'Forbidden'. Cleared the cookies, tried a few times since and it just says forbidden. ... CUPS wants the user "root" and root. You will be asked for the administration password (root or any other user in the "sys", "system", "root", "admin", or "lpadmin" group on your system) when performing any administrative function. The "lpadmin" command is used to manage printers from the command-line. lpadmin -p myprinter -E -v "ipp://11.22.33.44/ipp/print" -m everywhere. not specifying the correct password for the root account. accessing the CUPS server using the hostname or IP address of the server without enabling remote access for administration functions. This can be corrected by following the instructions in the "I Can't Do Administration Tasks from Another Machine!" section earlier in this appendix. Print using CUPS in linux for Zebra printer. Make sure CUPS is installed in the server. Logon to cups using b ro wser: localhost:631. You'll get the below screen. Click on the Add Printer button to add new printer and fill the details below and give Continue. eg., Select: App socket/HP jet direct and click continue. Give the IP address of the. I have added FileDevice yes on the cups conf file (/etc/cups/cupsd.conf) and restarted cups. CUPS is running btw. To access the web page, by the way, I have do so as root and give the root password. When I try to submit a job to print via CUPS to this printer as an ordinary user, I'm given errors on printer '[email protected]'. Specifically that localhost doesn't exist as a file or a directory. I also get a stream of messages to the effect that I should. phoenix airplane graveyard; old social media sites before facebook; espn nhl scoreboard; used mobile homes nova scotia; samsung oven settings button; 993 front spoiler. Change line 117 to: _atomic_removal (d, wr.key) Before install cups in Plugins. I also open the port 2812 on Firewall (This helps) Install CUPS. Setup your printer in Cups [omvipaddress]:631. user: root. password: your OMV root password. After add your printer do a TEST. If you previously enabled the root user in Ubuntu and now you want to disable it, set the root password to expire. To disable the root account password , use the following command: sudo passwd -l root Conclusion # To enable the root user account in Ubuntu, all you need to do is to set the root > <b>password</b>. tag 640939 moreinfo unreproducible thanks Hello all, I discussed this with Till, and we both have no real idea how to get to a situation where lpadmin as root asks for a password. It is already called with -h /var/run/cups/cups.sock to ensure it's not talking to a remote server. It seems you need a particular cups configuration to achieve this. 1) Go to System Preferences>Accounts. (Unlock the "click the lock to make changes") 2) Press Control+click on your account and select "Advanced Options". 3) In your account name, just change the first letter to lower-case. For eg. if your name is 'Albert Einstein', your default account name would be 'Alberteinstein'. This is why remote access disabled by default in cupsd.conf. Here's the steps I took to enable my network printer on server "adams" (defined in /etc/hosts) with network print queue "lp1": Click "Do Administrative Tasks" and enter your CUPS account (root) and CUPS root password. Click "Add Printer". Fill in the form. su - rpm -qa |grep cups If you see cups, then you don't need the next line. yum -y install cups Configure cups for remote access. Install links for local access to the cups configuration website, or use whatever web browser you have if you have X installed. yum -y install links Navigate to the Links configuration page. 19. · Termux FTP server is based on busybox and service is managed by [ Termux -services] 即可模拟root环境 Tor has, for example, been used by criminal enterprises, hacktivism groups, and law enforcement agencies at cross purposes, sometimes simultaneously; likewise, agencies within the U I did everything from the tutorial but when I try to connect to the server , it. CUPS_SERVER The hostname/IP address and port number of the CUPS scheduler (hostname:port or ipaddress:port). CUPS_SERVERBIN The directory where server helper programs, filters, backend, etc. can be found. CUPS_SERVERROOT The root directory of the server. CUPS_STATEDIR The directory where state files can be found. CUPS_USER. The primary mechanism for Ubuntu printing and print services is the Common UNIX Printing System (CUPS). This printing system is a freely available, portable printing layer which has become the new standard for printing in most Linux distributions. CUPS manages print jobs and queues and provides network printing using the standard Internet. I want to do it from the cups page: http: // localhost: 631 / admin. But it won't let me log in with the root username and password. I have seen that it can be modified with: lppasswd -a username. ... While printing a PDF (CUPS printing in Linux server using command lpr -P <filename>) i get a paper printed with the following data : "Unsupported. Normally you don't need to enter a root username and password to use CUPS. The error is likely to be in /etc/cups/printers.conf You could check the authorization entries in your printers.conf Even simpler though is that CUPS.org recommends just using your normal admin username and password when asked for authorization:. But if you want to do anything useful, you have to present your administrator password. Who's the administrator? root of course.What's the password? Well, you have to set it to whatever you want. To do so, go to a root shell and type: lppasswd -a root. Enter a password, and that's what you use in the CUPS screens. Package: cupsys Version: 1.1.23-10sarge1 Severity: wishlist File: cups Hi. I hate CUPS. You have my sympathies. :-P I've been trying to help a friend with his system. To reproduce: Set root password of a linux test system to foobar22 Set password of current user to foobar22 1 Go to localhost:631 in Cups 2.1.3 Click &quot;Administration&quot; Click &quot;Add Prin. not specifying the correct password for the root account. accessing the CUPS server using the hostname or IP address of the server without enabling remote access for administration functions. This can be corrected by following the instructions in the "I Can't Do Administration Tasks from Another Machine!" section earlier in this appendix. I think you have noticed earlier , that I was using "localhost" , instead of 127.0.0.1 or :::0:1 , as HOST. Actually, the " localhost " command automatically connects you to the available Local Host, no matter if it is 127.0.0.1 or :::0.1 etc.But if you still want to fix it, enter the following commands in New Session of TermuX carefully:mkdir -p. I went here http://localhost:631/ to be able to switch to color but was asked my username and password. "If you are asked for a username and password, enter your login username and password or the "root" username and password.". cups. Setting this # option to raw, for example, allows you to use drivers on your Windows clients. The fewer root programs you run, the safer your system is. If the password file existed, then a line for the alien account would have been appended to it. CUPS is licensed under the Apache License Version 2.0. After installing Manjaro Linux, setting up a printer is one of the first tasks that. 6 Answers. ssh root@localhost uses the same password for root. It looks like you have not set root password. To do that log in as root using sudo -s then use passwd command to set root password. If you decide to use the root account. Disable the ability to log in over ssh with root if ssh is exposed to internet. not specifying the correct password for the root account. accessing the CUPS server using the hostname or IP address of the server without enabling remote access for administration functions. This can be corrected by following the instructions in the "I Can't Do Administration Tasks from Another Machine!" section earlier in this appendix. Restart the CUPS Service. After making the above changes, restart the CUPS service as shown below. # service cups restart Shutting down cupsd done Starting cupsd done CUPS Web UI for Remote Access. After the above changes, you should be able to access the printer from Web URL as shown below: https://{your-ip-address}:631/admin. Re: cups password what exactly did you type ? 1 ) open a console 2 ) type su & press enter 3 ) enter root's password 4 ) type lppasswd -a username & press enter ( replace username with yours ) 5 ) enter password when asked 6 ) re-enter when asked 7 ) job done Andy To be is to do = Immanuel Kant To do is to be = Descartes. Password Sign up for GitHub By clicking "Sign up for GitHub", ... "GET /cups.css HTTP/1.1" 200 87 localhost - root [23/Apr/2003:23:43:01 +0200] "GET /printers/lpdtest HTTP/1.1" 200 3321 localhost - root [23/Apr/2003:23:43:02 +0200] "GET /images/show-completed.gif HTTP/1.1" 200 337. When you log into the CUPS administration tool, it assumes that you are the root user -- enter the root password. Details on using the CUPS web-based administration tool are provided in the CUPS documentation. See the DocView Printing category. Setting Up a Printer in CUPS. Setting up a printer correctly in CUPS depends on two critical choices. I went here http://localhost:631/ to be able to switch to color but was asked my username and password. "If you are asked for a username and password, enter your login username and password or the "root" username and password.". I tried setting up CUPS tonight, and after going to localhost:631, I chose Do Administration.. I then got the authentication dialog, and tried any number of username/password combinations with no luck. I tried root/root pw, my personal username/pw, CUPS, admin, nothing.